esphome:
  name: power

esp8266:
  board: nodemcuv2

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
  password: !secret ota

wifi:
  networks:
  - ssid: !secret wifi_ssid
    password: !secret wifi_password
  - ssid: !secret wifi_ssid2
    password: !secret wifi_password2
  domain: .lan


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: !secret ap_ssid
    password: !secret ap_password

captive_portal:

web_server:
   port: 80
   
mqtt:
  broker: mqtt.lan
  discovery: true

time:
  - platform: homeassistant
    id: time1
    timezone: Europe/Amsterdam
i2c:
  sda: GPIO2
  scl: GPIO14
  frequency: 300 kHz
  scan: true

sensor:

  text_sensor:
  - platform: mqtt_subscribe
    name: "mqttp02"
    id: mp1
    topic: p1/sensor/power/state
    internal: true

# zet de inhoud van fonts in je huidige dir
font:
 - file: 'slkscr.ttf'
   id: font1
   size: 8

 - file: 'BebasNeue-Regular.ttf'
   id: font2
   size: 42

 - file: 'arial.ttf'
   id: font3
   size: 27

 - file: 'ubuntu-r.ttf'
   id: tiny
   size: 10

 - file: 'Comic_Sans_MS.ttf'
   id: sans
   size: 22

 - file: "digital-7.ttf"
   id: sseg
   size: 26

# dit is een 1.3 inch display te kopen via amazon.nl zoek op azdelivery
display:
  - platform: ssd1306_i2c
    model: "SH1106 128x64"
    address: 0x3C
    reset_pin: GPIO0
    lambda: |-
          if (id(mp1).has_state()) {
           it.printf(0, 5, id(font3), TextAlign::TOP_LEFT , "%s kW", id(mp1).state.c_str());
           }
          if (id(power2).has_state()) {
            it.printf(0, 60, id(font3), TextAlign::BASELINE_LEFT , "TB7 %.2f°c", id(power2).state);
           }